The Merlin XLM is the definitive titanium hard tail, its lite and provides extremely quick acceleration making it a great starting point for a XC race bike. The custom double butted MTS size specific titanium frame makes this one of the finest racing hard tails available. Whether you are riding tight single track or open trail, the XLM is perfectly balanced and smooth tracking. Designed for 80/100mm Fork Merlin's original S-Bend chain stays (one of the most copied designs in cycling) provide solid power transfer Merlin XLM Frame 15" 16.25" 17.5" 18.75" 20" Seat Tube Length 15 16.25 17.5 18.75 20 Top Tube Length 22.2 22.8 23.4 24 24.7 Head Tube Length 4.2 4.4 4.7 5.3 6.3 Head Tube Angle 71 71 71 71 71.5 Seat Tube Angle 73.5 73.5 73 72.5 72.5 Chainstay Length 16.8 16.8 16.8 16.8 16.8 Standover 27.9 28.9 29.8 30.9 32.1 BB Drop 1.4 1.3 1.2 1.2 1.2 Frame Weight 2.71 3.03 3.08 3.25 3.46 31.6mm seatpost

The 2008 Yeti 575 Carbon is a lightweight frame that features a Carbon Fiber swingarm and 140 mm of rear travel, this is a frame that can be built into an All Mountain bike that climbs with the cross-country bikes and descends with the downhill bikes. Yeti Pure Tubeset and Aluminum Frame with 5.75" rear travel Carbon Fiber Swingarm Fox RP23 or DHX Air rear shock Enduro max sealed bearings Fits 34.9mm clamp size front derailleurs 73mm shell bottom bracket with 113mm spindle 30.9mm seatpost Rear Shock 2" stroke, 7.875" eye to eye 160-200mm rotor Maximum tire size 2.5" Weight LG RP23: 6.5 lbs NOTE: All measurements ininches. 140mm Fork ride height 511.0mm. 160mm Fork rideheight 545.0mm. Note: This part number is for the frameonly.

The redesigned Yeti 575 frame is a lightweight frame that features smooth handling and 5.75" of rear travel, helping you pick whatever line you want to take up and down the mountain. The 575's construction allows it to be built into a welter-weight All Mountain bike that climbs with the XC bikes and descends with the DH bikes. Yeti Pure Tubeset and Aluminum Frame with 5.75" rear travel Fox RP23 rear shock Enduro max sealed bearings Fits 34.9mm clamp size front derailleurs 73mm shell bottom bracket with 113mm spindle 30.9mm seatpost Rear Shock 2" stroke, 7.875" eye to eye Maximum tire size 2.5" Frame Weight with RP23 Shock: 6.55 lbs NOTE: All measurements ininches. 140mm Fork ride height 511.0mm. 160mm Fork rideheight 545.0mm. Note: This part number is for the frameonly.

The Litespeed Obed 29er is equally at home in the High Country or the Desert, it is great on climbs, while descending with equal prowess. Add in it's reliability, mellow geometry, and lightweight design and it makethis an all-out fun and functional frame. RDS dropout system enables changing from conventional to singlespeed dropouts(not included) GET tubeset offers compromised stiffness, ride quality, and durability Quad-TECH 3Al-2.5V stays offer optimized tire clearance and geartrain compatibility while keeping the rear wheel tracking precisely behind the front Trail friendly geometry Designed for 100 - 120mm fork compatibility Litespeed Obed Frame

The Yeti ARC-X frame can be built into a smooth and stable cyclocross bike, this frame usesunique top tube design that allows you to comfortably shoulder the bikeand get over any obstacle with ease making it a great place to start any cyclocross build. Yeti custom butted and tapered tubeset Unique top tube design allows for comfortable shouldering of the bike Asymmetrical chain stay allows for increased chain clearance and larger tires Yeti looptail rear triangle improves comfort and stability Frame weight 3.2 lbs Easton EC 90-X fork with Cane Creek S-2 headset Yeti ARC-X

You already love the Crosscheck for it's flexibility - race cyclocross, commute to work, hit the trail. Now it's even better with built-in couplers so it can be easily packed for travel. Why pay giant fees just to put your bike on an airplane? Add (optional) matching cases and haul your Crosscheck in style! Surly 4130 chromoly steel tubing, with couplers by S&S Machine Works Kit includes a matching fork Frame accepts standard 1 1/8" threadless headset, 28.6mm high clamp, bottom pull front derailleur, 27.2mm seatpost Accepts 700c size wheels, 132.5mm "gnot-rite" spacing lets you use either 130mm or 135mm spaced hubs

A true classic! Yeti's ARC frame represents the pinnacle of hardtail cross-country frame design. The ARC features proven race geometry, Yeti's "Pure" aluminum tubeset, and a claimed weight of just 3.45lbs (Medium). Accepts V-brakes or 51mm IS Disc brake Replaceable derailleur hanger Accepts 31.8mm top-swing (low clamp) top-pull front derailleur, 27.2mm seatpost, and 1 1/8 headsetGEOMETRY     *All measurements above are in inches. Chart based on a 100mm travel suspension fork (471mm axle-to-crown)   Xs Sm Md Lg A 15.5 17.5 19.0 20.5 B 21.0 22.4 23.4 24.4 C 71.0 71.0 71.0 71.0 D 73.0 73.0 73.0 73.0 E 16.9 16.9 16.9 16.9 F 40.0 41.2 42.2 43.2 G 11.5 11.5 11.5 11.5 H 27.5 29.4 30.2 31.4 I 4.00 4.00 4.50 5.25  

Surly Pugsley Mountain Frame The premise behind Pugsley’s design is based on the allowance of tires with a larger-than-average footprint. It was created to go where other bikes may flounder. The fork will accept 4" tires on 26" rims. The floatation and traction gained by using large-volume, low-pressure tires (we highly recommend the Surly Endomorph 3.7 tires) can get you over and through otherwise-unrideable terrain: ice, snow, sand, mud, wet rocks and roots. In many conditions, bigger is better. Who should ride Pugsley? Beach/desert riders, snow/ice riders, wilderness explorers, and anybody else in need of a bike that will provide extra stability, traction, and floatation when the terrain gets loose and unpredictable. If you fall into any one of those categories, you should ride a Pugsley. The Surly Pugsley Mountain Frame is a Sport Utility Bicycle that goes where other bikes dare not tread. Accepts massive Large Marge rims and 26x4.0 tires (RI407A01 ) Will run linear pull brakes if used with Large Marge rims Accommodates 4"-wide tires on 26" rims. Designed to provide increased stability, floatation, and traction on varied terrain. TIG-welded double-butted Surly 4130 CroMoly frame with rear-loading horizontal dropouts and derailleur hanger. International standard disc tab and removable cantilever pivots, spaced 120mm apart, foruse with Surly Large Marge rims. Includes straight-blade tapered suspension-corrected (447mm axle to crown) 4130 CroMoly fork. Spaced 135mm at the dropouts to accept a rear hub. Features 120mm-spaced removable canti pivots, rear international standard disc tab, 1-1/8" threadless steerer, and single dropout eyelets. Frame and fork dropouts are spaced at 135mm and offset 17.5mm, to the drive side, to compliment a wider chainline created by the use of a 100mm bottom bracket shell. Equal spacing and offset, of the fork and frame, allow front and rear wheels to interchange. Braze-ons: Eyelets for fenders, upper and lower rear rack mounts, top-tube and seatstay guides for use with continuous shifter and brake housing, dual water bottle bosses Component specs: 27.2mm seatpost, 30.0mm Constrictor seatpost clamp (included), 100mm bottom bracket shell, top-pull E-type front derailleur, 135mm hub, 22-32-44t chainring clearance, 1-/8" threadless headset 135mm hub spacing front and rear Includes adapter for building offset wheels Uses rear disc caliper adapters front and rear Wheels need to be built with 17.5mm offset (reverse dished) Specially drilled Large Marge rims specifically recommended for Pugsleys (offset requires offset drilling of spoke holes) *Adapter tool for building offset wheels comes with each Pugsley frame. Front Derailleur Clamp: E-Type Front Derailleur Cable Pull: Top Front Derailleur Style: Topswing Fork Rake: 100mm Brake Type: Linear Pull - Disc Wheel Size: 26" Headset Type: 1-1/8" Standard Cups BB Shell Width: 100mm Disc Mount Type: 51mm I.S. Rear Front Hub Spacing: 135 mm Rear Hub Spacing: 135mm Material: 4130 CroMoly Steerer Tube: 1-1/8" Threadless BB Thread Type: English Seatpost: 27.2 mm Note use the special Large Marge rims to give you more disc-side dish and more even spoke tension. Use these special, asymmetrically-drilled (6mm offset) Large Marge rims on the Pugsley. Non-Surly rims, intended for use in Pugsley wheelsets, should be drilled 6-12mm offset to the drive side. MEASUREMENTS / Measurements Key 16 in. 18 in. 20 in. 22 in. ST (C-T) Inches mm 16.0 406.4 18.0 457.2 20.0 508.0 22.0 558.8 TT (C-C) Inches mm 21.8 552.5 22.4 569.5 23.1 587.3 24.0 608.6 TT (Effec.) Inches mm 22.9 580.9 23.5 595.7 24.0 610.1 24.6 625.0 HT Angle degrees 70.5? 70.5? 70.5? 70.5? ST Angle degrees 72.0? 72.0? 72.0? 72.0? BB Drop Inches mm 2.2 55.0 2.2 55.0 2.2 55.0 2.2 55.0 CS Length Inches mm 17.6 448.1 17.6 448.1 17.6 448.1 17.6 448.1 Wheel Base Inches mm 42.0 1067.3 42.6 1082.3 43.2 1097.3 43.8 1112.6 S.O. Height* Inches mm 30.8 782.2 32.0 811.6 33.3 845.8 34.5 875.8 HT Length Inches mm 4.0 102.0 4.3 110.0 5.1 130.0 5.9 150.0 FK Length Inches mm 17.6 447.0 17.6 447.0 17.6 447.0 17.6 447.0 FK Rake Inches mm 1.7 43.0 1.7 43.0 1.7 43.0 1.7 43.0 Weight lbs. 5.56 5.66 5.88 6.1 *Standover height measured using Surly Endomorph 3.7" tire measuring 740mm in diameter.

The Yeti DJ is a strong frame that is ready to hit the dirt jumps or roll a round on the urban scene with a custom butted head tube this frame can be built into a bike that can roll with the big boys. Yeti Pure tubeset Custom butted head tube Replaceable dropouts ISCG '05 mounts Bottom Bracket Size: 73 mm shell, 113 mm spindle Seatpost 27.2 mm 2.5" max tire size 160mm rotor size 2008 Yeti DJ Frame Short Long  Center of BB to Top of TT 14" 14"  Effective Top Tube Length 22" 23.5"  Head Tube Angle 69 69  Seat Tube Angle 71 71  Chainstay Length 16.2" 16.2"  Wheelbase 42.3" 43.8"  Bottom Bracket Drop 12.2" 12.2"  Standover Height 26.5" 26.5"  Headtube Length 4.5" 4.5" All measurements above are in inches. 100mm Fork ride height 471.0mm.

Now with new colors and enhanced features for 2007 and re-designed to provide increased clearance between the fork knob / downtube interface, preventing clearance problems with some forks with tall knobs (i.e. Rockshox Reba 29'er). Same great value 29'er construction with TIG-welded butted 4130 chromoly tubes, plus a rigid suspension corrected fork. 51mm IS Disc tabs and removable pivots for V-brakes Your frame accepts a 28.6mm bottom pull, traditional (high clamp) front derailleur, 27.2mm seatpost, and 73mm bottom bracket This is a 29'er (700c wheel) frame and fork, and does not accept traditonal 26" MTB wheels. GEOMETRY small medium large x-large ST (C-T) Inches mm 16.0 406.4 18.0 457.2 20.0 508.0 22.0 558.8 TT (C-C) Inches mm 21.7 552.0 22.6 574.5 23.4 594.5 24.2 614.3 TT (Effec.) Inches mm 22.7 576.6 23.6 600.6 24.3 617.5 24.9 633.6 HT Angle degrees 71.0? 71.5? 72.0? 72.0? ST Angle degrees 73.0? 73.0? 73.0? 73.0? BB Drop Inches mm 2.7 68.0 2.7 68.0 2.7 68.0 2.7 68.0 CS Length Inches mm 17.0 431.0 17.0 431.0 17.0 431.0 17.0 431.0 Wheel Base Inches mm 41.1 1044.9 41.9 1064.0 42.4 1076.1 43.0 1092.1 Front-Center Inches mm 24.5 623.0 25.3 642.0 25.7 654.0 26.4 670.0 S.O. Height** Inches mm 30.8 781.6 31.9 811.1 33.0 838.2 34.1 866.8 HT Length Inches mm 3.1 80.0 3.5 90.0 3.7 95.0 4.1 105.0 FK Length Inches mm 18.4 468.0 18.4 468.0 18.4 468.0 18.4 468.0 FK Rake Inches mm 1.7 43.0 1.7 43.0 1.7 43.0 1.7 43.0 Weight lbs. 5.16 5.34 5.56 5.69 ** Standover height is based on a 29 x 2.1" tire that measured 737mm in diameter

The versatile Dambala One frame offers the 29'er market the opportunity to go geared or singlespeed. The built-in sliding dropouts offer a derailleur hanger for geared use, while the fore/aft adjustment lets you easily tension the chain for singlespeed use with no seperate tensioner needed. Voodoo "Black Magic" butted chromoly steel Extended seat tube with dropped top tube offers additional standover height - allowing even shorter riders to use a 29'er Accepts 700c (29" MTB) wheels Voodoo suggests a 100mm travel fork claimed 5.5 lbs (18") 51mm IS Disc brake mount (Frame also offers removable V-brake studs) Voodoo Dambala 14" 16" 17" 18" 19" 21" Seat Tube Length Center to Top 14" 16" 17" 18" 19" 21" Seat Tube Length Center to Center 11" 13" 14" 15" 16" 18" Top Tube Length-Effective 552 565 585 597 610 628 Bottom Bracket Drop 66 66 60 60 60 60 Bottom Bracket Height 305 305 310 310 310 310 Chainstay Length 455 45 455 455 455 455 Seat Tube Angle 75.0? 75.0? 74.5? 74.5? 74.0? 73.0? Head Tube Angle 71.0? 71.5? 72.0? 72.0? 72.0? 72.5? Fork Length 505 505 505 505 505 505 Head Tube Length 80 80 100 110 120 130 Standover Height 747 770 798 808 824 850 Measurements in millimeters unless noted.

Surly Long Haul Trucker Touring Frame Item Specifications Front Derailleur Clamp 28.6mm (1-1/8") Front Derailleur Cable Pull Bottom Front Derailleur Style Traditonal Fork Rake 45 mm Axle to Crown Length 376 mm Crown Race 30.0 Brake Type Linear Pull - Canti Wheel Size 26" Headset Type 1-1/8" Standard Cups BB Shell Width 68 mm Frame Size 42 cm Disc Mount Type None Front Hub Spacing 100 mm Rear Hub Spacing 135 mm Front Axle Type 9x1 Weight 1021 g Material 4130 CroMoly Steerer Tube 1-1/8" Threadless Brake Usage F/R Front BB Thread Type English Seatpost 27.2 mm Rear Axle Type 10x1 MEASUREMENTS / Measurements Key 42 cm 46 cm 50 cm 52 cm 54 cm 56 cm 58 cm 60 cm 62 cm ST (C-T) Inches mm 16.5 420.0 18.1 460.0 19.7 500.0 20.5 520.0 21.3 540.0 22.0 560.0 22.8 580.0 23.6 600.0 24.4 620.0 TT (C-C) Inches mm 19.4 492.6 20.0 508.3 20.7 525.1 21.1 534.8 21.6 549.5 22.2 564.4 22.8 580.1 23.4 593.8 23.8 603.5 TT (Effec.) Inches mm 19.9 505.0 20.3 515.0 20.9 530.0 21.3 540.0 21.9 555.0 22.4 570.0 23.1 586.0 23.6 600.0 24.0 610.0 HT Angle degrees 70.0? 70.0? 71.0? 71.0? 71.0? 72.0? 72.0? 72.0? 72.0? ST Angle degrees 75.0? 74.5? 74.0? 73.5? 73.0? 73.0? 72.5? 72.5? 72.0? BB Drop Inches mm 1.9 47.0 1.9 47.0 1.9 47.0 1.9 47.0 1.9 47.0 3.1 78.0 3.1 78.0 3.1 78.0 3.1 78.0 CS Length Inches mm 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 18.1 460.0 Wheel Sizes 26" 700c x x x x x x x x x Wheel Base Inches mm 40.8 1036.6 41.1 1042.7 41.2 1046.8 41.5 1053.1 41.9 1064.0 41.6 1055.7 42.0 1066.7 42.6 1080.9 42.7 1085.3 S.O. Height** Inches mm 27.7 703.0 28.5 723.8 29.8 756.9 30.5 775.1 31.2 793.1 32.0 812.2 32.7 830.0 33.5 849.7 34.1 867.3 HT Length Inches mm 4.4 110.7 4.6 116.7 5.7 144.0 6.4 163.0 7.2 182.0 6.0 152.0 6.7 171.0 7.4 189.0 8.3 210.0 FK Length Inches mm 14.8 376.0 14.8 376.0 14.8 376.0 14.8 376.0 14.8 376.0 15.4 390.0 15.4 390.0 15.4 390.0 15.4 390.0 FK Rake Inches mm 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 1.8 45.0 Weight lbs. --- --- --- --- --- --- 5.15 --- --- **Standover height for 26" model is based on a Primo Racer 26 x 1.25" tire that measures 628mm in diameter. Standover height for 700c model is based on a Rivendell (Panaracer) Ruffy Tuffy 700 x 28 (actually closer in size to 700 x 32) tire that measures 690mm in diameter