Mountain Bike Anatomy

One needs a mountain bike before you plan to go for a mountain biking. Different components of a mountain bike are as below:

The bottom bracket attaches the body of the bike to the crank set.

Brake cable is the one which would connect the lever of the brake to the brake mechanism.

Brake lever is the lever that is on the handles and activates the brakes. You have the front bake on the left side and the rear brake on the right side.

Chain is a circular set of links which transfers the power from the ring of the chain to the cogs.

Chain rings are the toothed rings which would link to the crank for holding the chain.

Crank is a lever which extends from the pedal to the bottom bracket, which transfers the power to the chain ring.

The mechanism used for shifting the chain from cog to another is Derailleur.

Down tube is the section of a frame which extends down from the bottom bracket to the stem.

Front shock is for absorbing the shock on the front fork.

Handlebar is a horizontal bar which is linked with the stem and has handgrips on both ends.

Headset is the mechanism that is on the front of the frame which links the front fork to the handlebars and the stem.

Hub is the center part of a wheel to which the spokes are attached.

The lower pulley of the rear derailleur which gives the spring tension for keeping the chain tight is Idler pulley.

Nipple is a threaded receptacle which holds the spoke’s end to the rim.

Pedal is the place to rest your foot to pedal on and this links to the crank.

The rear shock is the shock absorber on the dual suspension kind of bikes for the rear tire.

Rim is a metal ring which holds the spokes from the inside and from outside the tire.

The seat is termed as saddle.

The seat post gives support for the seat.

The metal rod which passes through the hub linking the dropouts of the frame to the wheel is the Skewer.

Spindle is a freely rotating axle which is attached the crank arms and also a part of the lower bracket.

The strong wires that link the rim to the hub is the spokes.

A part which links the steering tube to the handle bar is the stem.

The wheel hub is the center of the wheel to which the spokes are connected, this is essentially one of the important bicycle parts to bear in mind.

Read full articles about bike pedals and cycling at this web.

May 21 2009 | bikes | No Comments »

Enhance your old bike by changing few components

Many of the mountain biking fanatics are consistently searching for different ways of improving their ride. Be it making the bike faster, better control, more comfort, and serious riders are in constant and serious rides always lookout for the new and best components for a mountain bike available in the market. Searching for the best parts is not so difficult by making use of the famous online shops for bicycle.

A saddle is one of the components of the bike that would make the ride more comfortable. You can find different kind of designs for the seat and each one for a specific reason. Few seats are done for the comfort for women while the other ones would aid you in relieving the prostate pressure. Adjusting the stem of the handle bar is another way of improving the bike’s fit. By rising it a couple of inches, the rider can sit still more upright and this is preferred by some people.

All dedicated riders are aware that different tracks demand for various kinds of tire treads. By using the correct pattern of tread, you can have a better control of the bike when you fly through the trails. When you want to stop your bike on a dime then, the perfect ticket would be the best quality V-type brakes.

Good suspensions and shocks would always be in the top of a mountain biker’s list for vital components for a bike. The better your bicycle absorbs the downs and ups of the track, the more you would enjoy the fun and pleasure of riding. Heavy bike parts replaced with the lighter ones that are made from aluminum and titanium would make it easy for you to control to bike along with the increase in speed. You can find all these parts at good prices in a nice bike shop.

People who like mountain biking, however find that their bike is not working the way it did when bought new, or would want to improve the performance of the bike, comfort or fit, a few selected mountain bikes components might go long till improving your ride. No wonder you would be surprised to see how few selected components would change your bike’s fit and transform. Irrespective of if you would like to trim a little weight from the bike or have your old handle bar grips being replaced, a good quality bicycle shop should always help you in finding all the required parts for your bicycle.

Most of the mountain bike components are designed to improve the speed and also have more control on the ride. Shaving off a little weight from the bike would increase its speed. Having the heavy parts replaced with the high-tech and lighter ones with Aluminum, titanium, carbon fiber bicycle parts would make the bicycle very light.

May 12 2009 | bikes | No Comments »